What are the characteristics of aluminum shot? Can it be used after secondary treatment?

Because of its bright and rust free appearance, aluminum shot is widely used for spraying and polishing the surfaces of automotive springs, suspension springs, hardened gears, screws, chains, various stamping parts, standard parts, stainless steel and other high hardness workpieces. For the workpiece to be processed, it has the function of surface rust removal and surface strengthening. What are the characteristics of aluminum shot in operation? The following is a detailed introduction from the aluminum shot manufacturer:

1. Long service life, low consumption, few internal defects, high density, tempered martensite or tempered bending structure, strong impact resistance, moderate hardness, and long service life.

2. Strict quality management, unified materials, strict quality management in each production process, unified materials can standardize the surface treatment of aluminum shot.

3. It can relieve pressure and improve strength. The internal structure is dense, not easy to break, and the particle size distribution is uniform, which can reduce the stress and improve the surface strength of the workpiece.

4. The aluminum shot has fast cleaning speed, moderate hardness, fast cleaning speed and good elasticity. It can clean the products with complex corners or shapes evenly and quickly, thus shortening the processing time, increasing the processing capacity and reducing the production cost.

Because of its bright appearance and no rust, it is widely used for surface spraying treatment of automotive springs, suspension springs, hardened gears, screws, chains, various stamping parts, standard parts, stainless steel and other high hardness workpieces. Aluminum shot has the function of rust removal and surface strengthening on the machined workpiece.

The hardness of aluminum shot is proportional to the cleaning speed and inversely proportional to the service life. Therefore, the hardness is high, the cleaning speed is fast, the service life is short, the wear is large, and the hardness is good. But you know what? In fact, what has been used is valuable. The used aluminum shot can still be used after secondary treatment.

It is polluted due to repeated recycling, and impurities will be mixed in the aluminum pill, which will affect its continued use. Then it needs to clean itself. If mixed impurities can be divided into solid impurities and insoluble salts, different treatment methods shall be adopted for the two objects.

1. Solid impurities will be automatically removed by clean air. In the recycling cycle, most of the large impurities and more than one-third of the dust can be removed through the automatic sand suction separator. The solid impurities are removed when they enter the sand storage hopper through the abrasive screening machine.

2. Soluble salts in aluminum pellets can be removed by regular washing, and aluminum pellets with different uses can be used alternately. If you want to recycle, you need to clean it at this time. Only in this way can we make better use of it.

By doing so, the aluminum shot can be reused. Because of its long service life, it is deeply loved by customers. The market is very good, and the consumption is also very large, especially for some shipyards. We are the manufacturer of aluminum pellets. If you want to know more about this, please contact us. We will explain it to you.