What is the analysis of the purpose and characteristics of stainless steel shot?

What is the analysis of the purpose and characteristics of stainless steel shot?

The application of stainless steel shot is very wide, which is undoubtedly inseparable from its own advantages. Now, let's summarize the advantages and uses of stainless steel shot. In daily life, stainless steel pills are still widely used. What about the analysis of the purpose and characteristics of stainless steel pills?

What is the analysis of the purpose and characteristics of stainless steel shot?

1. Stainless steel shot is of medium hardness, pure composition and coverage.

2. It has no defects, such as ordinary cast iron powder, pores with extraterrestrial and other defects, and has a longer service life.

3. The performance of stainless steel shot can completely replace the imported products, and the price is much lower than the imported products, thus saving the cost of customers. The consumption of 1 kg stainless steel shot is equivalent to the consumption of 17 kg silicon carbide, which is equivalent to the consumption of 100 kg glass beads. It is equivalent to the consumption of 4kg ordinary steel ball. Equivalent to 3 kg aluminum and zinc flakes;

4. The casting surface treated with stainless steel medicine is smooth and rusty, which is helpful for environmental protection. You can also select two different shapes of products, predictive and non predictive.

How about the use of stainless steel shot?

1. Large, medium and small castings: clean the surface oxide to make it have good cleanliness and roughness, which can be used for subsequent processing and coating.

2. Steel plate pretreatment: used to remove impurities such as oxides and rust.

3. Construction machinery: stainless steel shot is used to remove rust, welding residues, oxide skin, eliminate welding stress, increase adhesion of antirust coating and metal substrate, and improve antirust quality.

4. Clean stainless steel plate: steel plates made of different materials need to use abrasives and particles of different sizes. Steel structure, H-shaped steel, C-shaped steel and angle steel.

5. Corruption management: improve corrosion resistance to achieve the required rust prevention level and tracking depth.

6. spray granular reinforcement: stainless steel shot is used to strengthen key parts, such as spiral spring, leaf spring, torque rod, gear, gearbox, bearing, bearing, camshaft, crankshaft, connecting rod, etc.

What causes the loss of stainless steel shot?

1. When using stainless steel shot for a long time, we will find that its spraying will be damaged to some extent. What is the main reason? In fact, this is mainly due to the lack of regular maintenance of stainless steel shot. This requires us to pay more attention to it, so that the service life of stainless steel propellant will not cause frequent damage.

2. The larger the diameter of the stainless steel ball particles, the greater the impact energy, the greater the strength of the pill spray, but reducing the coverage of the pill spray ball. Therefore, on the premise of producing the required spray intensity, the spray intensity should be reduced. It is beneficial to reduce the intensity of spray. In addition, the selection of spray size is also limited by the shape of spray parts, and its diameter should not exceed half of the radius of the inner circle of the groove. The size of stainless steel ball is usually selected between 0.2-3.0mm.

3. Crushing of stainless steel shot: the strength of broken spray is very low, so it should be removed frequently to ensure the integrity of broken particles is not less than 85. In addition, the cut ball is also scratched by the part.

4. spray angle of stainless steel shot: when it is vertical, spray is of high strength, so it is usually used for spraying in this state. If it is limited by the shape of the part, it must be executed at a smaller angle, and the size and speed of the emission size should be appropriately increased. Another important factor is equipment. If the sealing of shooting equipment is not good, or the filtering system and dust removal system of blasting equipment are not good, some small stainless steel ball particles will be removed and more losses will be caused.

These are the reasons for the loss of stainless steel shot. Please pay special attention during use.